De meeste nieuwe sample sets hebben een sample rate van 48 kHz, maar er zijn nog een paar oude sets met 44.1 kHz (waaronder inderdaad St. Anne en Burea). Als je een sample set laadt, zal HW je audio interface op de juiste sample rate instellen. En in jou geval lukt het dus niet om 'm van 44.1 naar 48 te zetten. De Focusrite USB 6 ondersteunt wel beide sample rates, dus dat zou het probleem niet moeten zijn.
Het kan zijn dat de ASIO driver zo staat ingesteld dat de sample rate niet door een ander programma veranderd mag worden. Check dus even je driver instellingen.
Een andere mogelijkheid zou kunnen zijn dat er een ander programma is dat ook gebruik maakt van de driver. De meeste drivers geven dan problemen, zeker als de sample rates niet hetzelfde zijn. Oplossing daarvoor is om in het sound control panel (klik met rechtermuisknop op het luidsprekericoontje rechtsonder) de 'Default device' op je interne geluidskaart te zetten.
Zie ook deze post van het HW-forum:
Martin Dyde schreef:The reason that we usually recommend not having your main audio interface selected on the Windows control panel is that many audio device drivers don't allow two separate applications to stream audio to the audio interface simultaneously, especially at different sample rates. So if an audio interface is being used at 48 kHz by a 'pro audio' ASIO application like Hauptwerk and you also have it selected as the default Windows output then Windows (or your web browser or some other application) might try to play a sound to it at 22050 Hz or 44.1 kHz. Depending on the audio interface's driver that could cause the driver to halt sound output suddenly from the first application, play at the wrong pitch, experience audio glitches, or have other problems.
Some audio interfaces do have drivers that allow multiple audio applications to access them simultaneously, but real-time sample rate conversion potentially reduces quality, adds latency, and adds CPU overheads to some degree, hence many semi-pro/pro audio interfaces don't support that, since they're primarily designed for low-latency, high quality and high performance.